[TRNSYS-users] Two instances of a type in one simulation

[NEMAR Maroun via TRNSYS-users]

​Christian,
  I met almost the same problem two months ago, and I have solved hardly. I
don't know how can I show you through email, if you could mail me your
project and your PCM components to compare it with mine then to fix it for
you. If there any problem with you PCM component, I'll make you know, if
not I'll fix the problem the same way I've done.

Best regards,
*Maroun NEMAR*
Building performance engineer
*Building Energy Analysis & Engineering*
T: 0620548116
E: maroun.nemar at gmail.com
web site : www.bureauveritas.fr

2016-05-20 16:38 GMT+01:00 Christian Herløv Krintel <
trnsys-users at lists.onebuilding.org>:

> Dear TRNSYS users,
> I have a multizone building model, where I want to use two PCM components
> (Type 399) to model the ceilings of two adjacent rooms.
> When I run the simulation I noticed that the two components somehow share
> information. The PCM temperature is the same in both components.
>
> I tried to switch the component order in the Control Cards, which changes
> the PCM temperature, but they are still equal.
> How can I run two instances of a type side-by-side? Is this a limitation
> in how Type 399 was programmed?
>
> Best Regards
> Christian
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160520/3aabd1d0/attachment-0001.htm>