[TRNSYS-users] NTYPE

[adnan rasheed]

hi McDowell,

Thanks you very much for making me clear about this confusion. it really
helps

Regards
Adnan

On Mon, May 2, 2016 at 5:39 PM, Alastair McDowell <
alastair.mcdowell at energyae.com> wrote:

> Hi Adnan,
>
>
>
> Use Ntype 20, QCOMO for ‘energy to the outside surface incl. conv to the
> air and l-wave radiation to the other surfaces or Tsky’.
>
>
>
> Note the definition of this energy flow means for a positive heatloss,
> QCOMO will be a negative value.
>
>
> After you have selected QCOMO, double click on it to select the particular
> wall surface you want to know heat loss/gain for.
>
> Kind regards,
>
> *Alastair McDowell*
>
> Engineering Consultant
>
> *Energy Analysis & Engineering* – Enabling innovation for a sustainable
> future
>
> T: +61 450 600 842
>
> E: alastair.mcdowell at energyae.com
>
> 608 Harris St Sydney NSW 2007 Australia | http://www.energyae.com
>
>
>
> *From:* TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] *On
> Behalf Of *Adnan Upm Spain
> *Sent:* Thursday, April 28, 2016 11:55 PM
> *To:* TRNSYS users mailing list at OneBuilding. org <
> trnsys-users at lists.onebuilding.org>
> *Subject:* [TRNSYS-users] NTYPE
>
>
>
> Hello everyone,
>
> I want to get convective + radiative ( longwave radiation) heat loss
> through one external wall i am using type56 and building model is made in
> TRNSBuild. Which NType can give me this output among these
>
> Ntype 19 - Qcomo
> Ntype 20 - Qcomi
> Ntype 77 - Qsky
> Ntype.      - Qheat
> NType2.   - Qsens
>
> BEST Regards
> Adnan
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160502/9d189d17/attachment.htm>