[TRNSYS-users] Linear parabolic concerntrator

[mohammad abdunnabi]

Dear TRNSYS users
Dear Matt

I'm still having problem with linear parabolic concentrator, when I use 
differential controlar Type2 whatever the high level cut-out temp is (120, 200, 
300,..) it's always run as 0n-off even when I minimize the area of the reciever 
or the concentation ratio. also when I use a continues signal as to work from 
for instance 7:00 am to 7pm the output temp from the collector is very low (a 
bit strange for me) (note: I;ve change the max array tempertaure and set 
tempertaure in type 536). Anyway, I've attached the file and if any one 
intrested and can check it to let me know where is may mistake is I wouyld very 
grateful to him

Many thanks in advance
 Dr. Mohammad Abdunnabi
Head of Thermal Energy conversion Department
Center for Solar Energy Research and Studies (CSERS) 


Tripoli-Libya
P.O.Box: 12932
Tel.: +218 21 3699323
Fax.: +218 21 3699322
Office Phone: +218 21 7201993
Mobile Phone: +218 92 2256067 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CSP8.tpf
Type: application/octet-stream
Size: 190804 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110524/8ade6da5/attachment-0010.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CSP8.dck
Type: application/octet-stream
Size: 11545 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110524/8ade6da5/attachment-0011.obj>