[TRNSYS-users] TRNSYS-users Digest, Vol 76, Issue 36

[WALID KADRI]

Thank you, thank you very much.
I'm preparing my memoiry of master i'm special in mechanic engeneering of
thermal power, my memoiry is about ISCC integrated solai combine cycle
systeme, if you have in exemple projet in transys about this send it please
to study it

2011/4/11 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. NTYPE 906: Energy balance for surfaces (??)
>
>
> ---------- Message transféré ----------
> From: 王洋 <wanghongyang1767 at gmail.com>
> To: trnsys-users at cae.wisc.edu
> Date: Mon, 11 Apr 2011 17:07:35 +0200
> Subject: [TRNSYS-users] NTYPE 906: Energy balance for surfaces
> Dear all,
>
>     I have some questions about NTYPE 906: Energy balance for surfaces:
>
>    1. Please see the ATTACHED.
>
>       Based on the Manual, B6_BAL should be always 0, but here i think its
> calculation is wrong. B6_BAL isn't -8.180E-13, it should be 2.683E-03, so
> it's not 0, PLEASE tell me some possible reasons about it.
>      1_B6_BAL  = -   1_B6_DQWALLdt-   1_B6_QCOMI+   1_B6_QCOMO+
> 1_B6_QRADGI+    1_B6_QRADGO-    1_B6_QALG
>
>       -8.180E-13     -3.838E+03      2.683E-03     -3.838E+03
> 0.000E+00      0.000E+00      0.000E+00
> 2. B6_DQWALLdt in Manual is change of internal energy of surface, but it's
> a little abstract. Here I only used the heatings in TRNBUILD, no other
> internal gains. PLEASE give me some examples about change of internal energy
> of surface. Is it energy Generation of Wall etc.? Why here is minus
> (-3.838E+03)? What's difference between  B6_DQWALLdt and B6_QCOMO? Why here
> they are the same? Is there some reasons?
>
> 3. I think B6_QCOMI is some heat flux enter into inside of wall such as the
> heat from the heatings of indoor and the solar radiation, Is it right?
> B6_QCOMO is heat loss from the wall outside, Is it right? If wrong, PLEASE
> tell me what are their meaning.
>
> Thanks!
>
> br.
>
> wang
>
>
> ---------- Forwarded message ----------
> From: 王洋 <wanghongyang1767 at gmail.com>
> Date: 2011/3/8
> Subject: NTYPE 906: Energy balance for surfaces
> To: trnsys-users at cae.wisc.edu
>
>
> Dear all,
>
>     I have some questions about NTYPE 906: Energy balance for surfaces:
>
>    1. Please see the ATTACHED.
>
>       Based on the Manual, B6_BAL should be always 0, but here i think its
> calculation is wrong. B6_BAL isn't -8.180E-13, it should be 2.683E-03, so
> it's not 0, PLEASE tell me some possible reasons about it.
>      1_B6_BAL  = -   1_B6_DQWALLdt-   1_B6_QCOMI+   1_B6_QCOMO+
> 1_B6_QRADGI+    1_B6_QRADGO-    1_B6_QALG
>
>       -8.180E-13     -3.838E+03      2.683E-03     -3.838E+03
> 0.000E+00      0.000E+00      0.000E+00
> 2. B6_DQWALLdt in Manual is change of internal energy of surface, but it's
> a little abstract. Here I only used the heatings in TRNBUILD, no other
> internal gains. PLEASE give me some examples about change of internal energy
> of surface. Is it energy Generation of Wall etc.? Why here is minus
> (-3.838E+03)? What's difference between  B6_DQWALLdt and B6_QCOMO? Why here
> they are the same? Is there some reasons?
>
> 3. I think B6_QCOMI is some heat flux enter into inside of wall such as the
> heat from the heatings of indoor and the solar radiation, Is it right?
> B6_QCOMO is heat loss from the wall outside, Is it right? If wrong, PLEASE
> tell me what are their meaning.
>
> Thanks!
>
> br.
>
> wang
>
>
>
>
> 2011/3/7 王洋 <wanghongyang1767 at gmail.com>
>
>>
>>
>>
>> 2011/3/7 <trnsys-users-request at cae.wisc.edu>
>>
>>> Send TRNSYS-users mailing list submissions to
>>>        trnsys-users at cae.wisc.edu
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>> or, via email, send a message with subject or body 'help' to
>>>        trnsys-users-request at cae.wisc.edu
>>>
>>> You can reach the person managing the list at
>>>        trnsys-users-owner at cae.wisc.edu
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of TRNSYS-users digest..."
>>>
>>> Today's Topics:
>>>
>>>   1. Re: Strange error (hotline)
>>>   2. Questions...please reply (Juv?ncio Correia Tavares)
>>>
>>>
>>> ---------- 已转发邮件 ----------
>>> From: "hotline" <hotline at transsolar.com>
>>> To: rraye001 <rraye001 at fiu.edu>
>>> Date: Mon, 7 Mar 2011 13:33:34 +0100
>>> Subject: Re: [TRNSYS-users] Strange error
>>>  Hi,
>>>
>>> seems like you hit a limit for the generation of the transfer function
>>> coefficients.
>>> Please check if the roof is defined correctly.
>>>
>>> Regards
>>> Christian
>>>
>>>
>>> TRANSSOLAR Software Team
>>>
>>> hotline at transsolar.com
>>>
>>>
>>>
>>> www.trnsys.de
>>>
>>> Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen
>>> und Nutzerkomfort in Gebäuden
>>>
>>> Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart /
>>> Amtsgericht Stuttgart - HRB 23347 / UsSt.-Id: DE152272639
>>>
>>> Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
>>> Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher
>>>
>>>
>>>
>>>  ------------------------------
>>>    *Von:* Rambod Rayegan [mailto:rraye001 at fiu.edu]
>>> *Gesendet:* Samstag, 5. März 2011 06:08
>>> *An:* trnsys-users at cae.wisc.edu
>>> *Betreff:* [TRNSYS-users] Strange error
>>>
>>>   Dear TRNSYS users:
>>>
>>> I am working on a model created buy TRNSYS 3d plugin in google sketchup
>>> for couple of months. Everyday I add  something to it or modify some
>>> parameters in it. Today, I have just changed the roof type in the building
>>> type 56 and tried to run it again but I have received the following error:
>>>
>>>
>>> Visual Fortran run-time error
>>>
>>> fortrtl:severe(64):input conversion error, unit 56, file
>>> C:\.....building.trn
>>> Image PC Routine Source DFORRT.DLL  02014C49 Unknown  Unknown Unknown
>>>
>>>
>>> Anybody has an idea to solve the issue?
>>>
>>> Thank you.
>>>
>>> Rambod Rayegan
>>> Ph.D Candidate
>>> Mechanical Engineering Department
>>> Florida International University
>>> 10555 W Flagler St, EC3620
>>> Miami, FL, 33174
>>>
>>> 305-348-3558 (Office)
>>> 786-218-7375(Cell)
>>> 305-348-1932 (Fax)
>>>
>>>
>>>
>>> ---------- 已转发邮件 ----------
>>> From: "Juvêncio Correia Tavares" <juvenciotavares at hotmail.com>
>>> To: <trnsys-users at engr.wisc.edu>
>>> Date: Fri, 4 Mar 2011 15:16:10 +0000
>>> Subject: [TRNSYS-users] Questions...please reply
>>>
>>> I`m doing a dynamic simulation of buildings in TRNSYS, during the
>>> simulation gave the following error ... as you can see in the picture.
>>>
>>> And also, I would like to send me a PDF about connection.
>>>
>>> I await your response.
>>>
>>> thanks.
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing list
>>> TRNSYS-users at cae.wisc.edu
>>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>
>>>
>>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110508/6fffb015/attachment-0005.htm>