[TRNSYS-users] intercommunication between trnsys and matlab

[David BRADLEY]

this email list is no longer being used. Please post your question on 
the TRNSYS user forum (www.trnsys.org/community). If you have tried to 
sign into that site but have not received a confirmation email, please 
let me know and I will help you sort it out.

kind regards,

  David


On 9/10/2025 6:27 AM, 大聪明 via TRNSYS-users wrote:
> I want to achieve intercommunication between trnsys and matlab. The 
> version I downloaded is trnsys18 (64-bit), and the version of matlab 
> is 2016b (64-bit). The path of the system file has also been set 
> correctly. However, running the built-in cases of trnsys shows: our 
> input file uses Type 155 (Calling Matlab)."Type155.dl" was found but 
> could not beloaded. Please make sure that a  supported version of 
> Matlab is instaled and that Matlab's "binlwin64"(or"biniwin32" if you 
> are using the 32-bit version) folder is on Windows' search path. Does 
> anyone know what the reason is? What are some good solutions?
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Thermal Energy System Specialists, LLC
8040 Excelsior Dr., Suite 403
Madison, WI 53717

d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20250912/cadfbbd4/attachment.htm>