[TRNSYS-users] TRNSYS model and simulation

[ARCHIT MAHAWAR 19BME0489]

Here the TRNSYS model and simulation results have been attached. The
results needed should be temperature within 55 to 60 deg C. The blue line
denotes the AVG TANK TEMP and red line shows TANK OUTLET TEMP. The red line
has max temp of 48 deg C and is not falling within the required temp range.
This model is for a solar assisted heat pump for hot water generation. Can
anyone suggest whether a thermostat should be used and how to connect it.
Thank You.

-- 
**Disclaimer:*
This message was sent from Vellore Institute of Technology.  
The contents of this email may contain legally protected confidential or 
privileged information of “Vellore Institute of Technology”.  If you are 
not the intended recipient, you should not disseminate, distribute or copy 
this e-mail. Please notify the sender immediately and destroy all copies of 
this message and any attachments. If you have received this email in error, 
please promptly notify the sender by reply email and delete the original 
email and any backup copies without reading them.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230331/f1b32f63/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ghf.png
Type: image/png
Size: 27553 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230331/f1b32f63/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ivb.png
Type: image/png
Size: 74503 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230331/f1b32f63/attachment-0003.png>