[TRNSYS-users] Floating photovoltaic component in TRNSYS

[SENTHIL KUMAR, gokula [Student]]

Dear TRNSYS users,

I would like to know the suitability of using Type567-6 (TESS component) for floating photovoltaics. When I vary the back surface temperature of the component, I did not find any impact on the power generation from it. Please let me know whether the type567-6 is suitable for it or not.

Please also advice which component 'type' is suitable for floating photovoltaics, especially for studying the impact of back surface temperature on the power generation.

Thank you so much!

Best regards,
Gokula Manikandan Senthil Kumar


[https://www.polyu.edu.hk/emaildisclaimer/PolyU_Email_Signature.jpg]

Disclaimer:

This message (including any attachments) contains confidential information intended for a specific individual and purpose. If you are not the intended recipient, you should delete this message and notify the sender and The Hong Kong Polytechnic University (the University) immediately. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited and may be unlawful.

The University specifically denies any responsibility for the accuracy or quality of information obtained through University E-mail Facilities. Any views and opinions expressed are only those of the author(s) and do not necessarily represent those of the University and the University accepts no liability whatsoever for any losses or damages incurred or caused to any party as a result of the use of such information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230328/ee48fa7b/attachment.htm>