[TRNSYS-users] Issue with Type 190 in TRNSYS

[David BRADLEY]

Masoud,

   I would reach out to your distributor for a question as specific as 
this one. Please be aware that often times distributors hotlines do not 
have the resources to assist with debugging user written (or user 
modified) Types and that only v18 is officially supported. You'll need 
to send the project (*.tpf), any other files that needed in order to run 
the simulation, and the source code for your component. If you aren't 
sure which distributor hotline to contact, send me a direct message and 
I'll steer you in the appropriate direction.

kind regards,

  David


On 7/13/2023 6:20 AM, Masoud Haddad via TRNSYS-users wrote:
>
> Dear TRNSYS Support Team,
>
> I hope this email finds you well. I am writing to seek your assistance 
> regarding an issue I am encountering with Type 190 in TRNSYS. I have 
> been using Type 190 for my PV system simulation, specifically the PV 
> array with the PV inverter.
>
> To provide more context, I have successfully utilized Type 194 for a 
> similar PV system simulation. However, when I attempted to adapt the 
> code to Type 190, I encountered difficulties in the input file. It 
> seems that TRNSYS is unable to recognize and read the values correctly 
> from the input file.
>
> In the input file, I have specified the PV array model as Type 190 and 
> made the necessary adjustments in the code accordingly. However, when 
> I run the simulation, TRNSYS reports an error, stating "Unrecognized 
> variable name or bad data card."
>
> I have thoroughly reviewed the code and ensured that there are no 
> syntax errors or inconsistencies. I have also cross-checked the input 
> file to verify that the data is correctly formatted and in accordance 
> with the Type 190 requirements.
>
> I kindly request your assistance in resolving this issue. It would be 
> greatly appreciated if you could provide guidance or any insights into 
> why the code works with Type 194 but encounters difficulties with Type 
> 190. I am using Type 190 for my PV simulation because it is more 
> appropriate for my specific application.
>
> Please let me know if you require any additional information or if 
> there are any specific troubleshooting steps I should follow. I am 
> confident in my understanding of Type 194, but I am facing challenges 
> in adapting the code to Type 190.
>
> Thank you very much for your attention to this matter. I look forward 
> to your prompt response and assistance.
>
> Sincerely, Masoud Haddad
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230713/efee5daf/attachment.htm>