[TRNSYS-users] TRNSYS3D question

[David BRADLEY]

You can click "yes." SketchUp entities are entirely irrelevant to the 
Trnsys3d entities and vice versa. This message sometimes comes up if you 
have opened a SketchUp model and then traced over its objects to create 
Trnsys3d objects. However, it also sometimes comes up if you have 
accidentally drawn something when a Trnsys3d zone was not selected. When 
a Trnsys3d zone is not selected then shapes you draw aren't tied to a 
zone and when you close, then reopen the file they will disappear.

kind regards

  David


On 2/12/2023 1:47 AM, H via TRNSYS-users wrote:
>
> Hello, everyone,
>
>  There is an question when I open my sketchup model of TRNSYS3D, as 
> shown in following picture. Why did it occur and which one should I 
> choose（Yes or No or cancel)?
>
> Best regards,
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230213/d6d82355/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 62328 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230213/d6d82355/attachment-0001.png>