[TRNSYS-users] External horizontal louvers (Horizontal slats) modelling in TRNSYS for simulating thermal radiation and daylighting

[asmin aryal]

Dear All,
I want to model a horizontal automated slat (motorized Louvers) on TRNSYS
to simulate the daylight and heat gain/radiation through the window with
the slats. The figure of the slat is given below:
[image: image.png]
Fig: Horizontal slat for controlling the daylighting as well as thermal
radiation entering the fenestration
I am wondering how can i incorporate the shading device i.e. the horizontal
slats on my model. Is it possible to draw the slats on google sketchup
TRNSYS 3d plugin and do the trnsys calculation of daylighting and thermal
radiation?
Is it possible to model these slats and change the tilt angle of the
horizontal slats?

Thank you in advance.

Best regards,
Ashmin Aryal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230205/f69272d4/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 163161 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230205/f69272d4/attachment-0001.png>