[TRNSYS-users] (no subject)

[ARCHIT MAHAWAR 19BME0489]

Sir we have connected the pumps and the differential controller in our
model and also our simulation results got better and now we are getting the
outlet temperature between the desired range but we were not able to
connect thermostat/ aquastat . Can you please let us know how should we
connect it in the model?
Also we need to find out efficiency and energy consumption of the system
how should we proceed with that?
Thank you.

-- 
**Disclaimer:*
This message was sent from Vellore Institute of Technology.  
The contents of this email may contain legally protected confidential or 
privileged information of “Vellore Institute of Technology”.  If you are 
not the intended recipient, you should not disseminate, distribute or copy 
this e-mail. Please notify the sender immediately and destroy all copies of 
this message and any attachments. If you have received this email in error, 
please promptly notify the sender by reply email and delete the original 
email and any backup copies without reading them.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230404/fbe529ec/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20230403_153117.jpg
Type: image/jpeg
Size: 2327093 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230404/fbe529ec/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20230403_153906.jpg
Type: image/jpeg
Size: 2596833 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230404/fbe529ec/attachment-0003.jpg>