[TRNSYS-users] Type 1248 for AHU

[David BRADLEY]

Type1248 has been used in a lot of projects. I would suggest that you 
contact your distributor with specific information about what results 
you were expecting and what results you got. They will probably need to 
look at the project so I would suggest that you send it along with any 
files needed in order to run it.

kind regards,

  David


On 11/24/2022 07:39, Arnat via TRNSYS-users wrote:
>
> Hello !
>
> I’m trying to use type 1248 as a heat pump (instead of using heating 
> or cooling oils) in order to produce heat or cold for an Air handler 
> unit (AHU). However, the results obtain are not as expected. Does 
> anyone here use type 1248 ? Does it work correctly ? Is there another 
> simple way to model an AHU with thermodynamic system (heat pump) ? 
> Thanks a lot for your help!
>
> Best regards,
>
> ENGIE Mail Disclaimer: http://www.engie.com/disclaimer/
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20221124/9e8f81dd/attachment.htm>