[TRNSYS-users] trnViewBUI distorted building model

Mon May 16 14:00:48 PDT 2022

Dear Christina,

Yes, it works for me as well. Thank you for letting me know.

Regards,
Cem

From: hotline<mailto:hotline at Transsolar.com>
Sent: 16 May 2022 08:56
To: Cem Kalkan<mailto:CemKalkan3 at cmail.carleton.ca>; TRNSYS users mailing list at OneBuilding.org<mailto:trnsys-users at lists.onebuilding.org>
CC: David BRADLEY<mailto:d.bradley at tess-inc.com>
Subject: AW: [TRNSYS-users] trnViewBUI distorted building model

[External Email]
Dear Cem,

I'm not sure what causes this, but after importing the idf in TRNBuild click save on the b18 file before opening TRNView, that should fix the issue.
I successfully tested it with your idf, but let me know if it works for you.

Best regards,
Christina

__________________________________________________________________________________________________

Transsolar KlimaEngineering

Stuttgart  | München | Paris | New York

https://www.trnsys.de<https://www.trnsys.de/>
https://transsolar.com/de

Transsolar Energietechnik GmbH | Curiestraße 2 | 70563 Stuttgart

Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

The simulation project you have sent will be stored on the local servers of Transsolar Energietechnik GmbH for the duration of the project support. Our employees are obliged by us to confidentiality. After this period, all project-related data is deleted.

The storage of your personal e-mail and other contact information is based on the mutual interest in the execution of this traffic and on a mutual business contact. If you have any questions, please contact our data protection officer at privacy at transsolar.com<mailto:privacy at transsolar.com>. Our privacy policy can be found here<http://www.trnsys.de/docs/userservice/userservice_dataprivacy_en.htm>.

Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> im Auftrag von David BRADLEY via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Gesendet: Freitag, 13. Mai 2022 15:40
An: Cem Kalkan <CemKalkan3 at cmail.carleton.ca>; TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: David BRADLEY <d.bradley at tess-inc.com>
Betreff: Re: [TRNSYS-users] trnViewBUI distorted building model

I would think so, yes. Keep an eye on the wall, floor, roof, and ceiling areas in TRNBuild. If any of them look abnormally large or small then that would be a red flag.

kind regards,

 David

On 05/12/2022 16:46, Cem Kalkan wrote:

David,

Thank you very much for your suggestion. I followed your instructions to export the .idf file from TRNBuild. After that, I opened the new .idf file in SketchUp. The building was not distorted. This situation leads me to believe that there might be a problem with the interaction between TRNViewBUI and the .idf file. Is it possible to say it is safe to use the .idf file for further simulation studies?

Regards,

Cem

From: David BRADLEY<mailto:d.bradley at tess-inc.com>
Sent: 11 May 2022 18:24
To: TRNSYS users mailing list at OneBuilding.org<mailto:trnsys-users at lists.onebuilding.org>
CC: Cem Kalkan<mailto:CemKalkan3 at cmail.carleton.ca>
Subject: Re: [TRNSYS-users] trnViewBUI distorted building model

[External Email]

Cem,

 I have not run into this kind of problem before. However, the *.idf looks fine. One thing you might try is to open the *.b18 file in TRNBuild and select "export Trnsys3D file..." from the File menu. That will create a new *.idf file based on the geometry that TRNBuild understands. The distorted view looks as though one of the wall vertices might have gotten written incorrectly. Once the new *.idf is created open it in SketchUp; if the building is distorted then try reimporting the original *.idf (the one you attached) into TRNBuild.

kind regards,

 David

On 05/10/2022 13:38, Cem Kalkan via TRNSYS-users wrote:

Hi All,

I created a 3D building model(see attached) using the TRNSYS 3D plugin on Sketchup. I imported the .idf file into the TRNBuild. After that, I checked the surfaces in the GUI, and I couldn't find any problems. However, when I checked the 3D building model in the trnViewBUI extension, the model was highly distorted(see attached). I am not sure if there was an error in the .idf file or the TRNViewBUI extension. Has anyone encountered a problem like this before?

Regards,

Cem

_______________________________________________

TRNSYS-users mailing list

TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>

http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

--

***************************

David BRADLEY

Principal

Thermal Energy System Specialists, LLC

3 North Pinckney Street - suite 202

Madison, WI  53703 USA

P:+1.608.274.2577

d.bradley at tess-inc.com<mailto:d.bradley at tess-inc.com>

http://www.tess-inc.com

http://www.trnsys.com

This email contains links to content or websites. Always be cautious when opening external links or attachments.

Please visit https://carleton.ca/its/help-centre/report-phishing/ for information on reporting phishing messages.

When in doubt, the ITS Service Desk can provide assistance. https://carleton.ca/its/chat

-----End of Disclaimer-----

--

***************************

David BRADLEY

Principal

Thermal Energy System Specialists, LLC

3 North Pinckney Street - suite 202

Madison, WI  53703 USA

P:+1.608.274.2577

d.bradley at tess-inc.com<mailto:d.bradley at tess-inc.com>

http://www.tess-inc.com

http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220516/4c4efcbd/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 645955F02366425AB66E1F3A64655B07.png
Type: image/png
Size: 159 bytes
Desc: 645955F02366425AB66E1F3A64655B07.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220516/4c4efcbd/attachment-0002.png>