[TRNSYS-users] (no subject)

[Jacopo Valente]

Dear TRNSYS users,

I am trying to simulate a system for the conditioning of a building, in particular first an air-to-air heat pump system and then a water-to-water heat pump system. In my case I haven’t the building modeling like using type56, but I have the required loads in both heating and cooling mode. I have the tess library and I tried to connect the heat pump to the type690, but I'm not sure it's the correct choice. Which is the type most suitable for reading the loads and controlling the zone temperature?

Best regards,
Jacopo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220509/7a3746fc/attachment.html>