[TRNSYS-users] Error in reference area - TRNBuild

[Maja Danovska]

Dear Users,

I am struggling with TRNSYS3D. I created a geometry where each surface was
defined as a wall, ceiling, roof and so on. Once I imported the idf into
TRNBuild, I got a reference floor area for each thermal zone equal to 1,
and consequently errors in the volume as well. The geometry is quite
complex, meaning that I cannot calculate the volume by myself easily.

Do you know why I get this error?

Thanks a lot in advance.

Kind regards

-- 
*Maja Danovska*

Research Fellow
Dep. of Civil, Environmental and Mechanical Engineering
University of Trento
via Mesiano, 77 - 38123 - Trento - ITALY

maja.danovska at unitn.it
+393403391289
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220330/721ed0b2/attachment.html>