[TRNSYS-users] genopt+trnsys18

[David BRADLEY]

The most likely issue is either a permissions problem, or a path name 
problem.

The first thing I would suggest is to open the existing TRNOpt example 
(if you are not already) and make sure that it runs before you start 
trying to apply the same techniques to your own project. If you have 
problems with the examples then the Optimization library manual (in 
.\Trnsys18\TESS Models\Documentation\) is set up as a tutorial to get 
you started with settings. As a side note, TRNOpt is specific to a 
particular version of GenOpt; make sure that you're using the one 
referenced in the documentation and not necessarily the latest version 
of GenOpt.

Check to make sure that GenOpt is NOT installed in the .\Program Files\ 
or .\Program Files(x86)\ directories. Second, check to make sure that 
both your user account and the SYSTEM user account both have full admin 
access to the TRNSYS working directory, the GenOpt directory (and if 
possible, everywhere else).

As far as the paths are concerned, make sure that you have fully 
explicitly specified all path names in your Simulation Studio project 
(ie start all paths with c:\TRNSYS_GenOpt\ etc.)

kind regards,

  David



On 06/30/2022 15:04, المهندس حيدر ناجي via TRNSYS-users wrote:
> I want to make improvements to my project and I always get the 
> following error message
>
>
>
>
> image.png
> or
> image.png
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220630/655e9f81/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 5307 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220630/655e9f81/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 22530 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220630/655e9f81/attachment-0003.png>