[TRNSYS-users] MRT under solar radiation

[المهندس حيدر ناجي]

Yes, you can calculate the thermal comfort by adding the required
parameters in the TRNBuild program, as shown in the picture[image:
image.png]

‫في الأربعاء، 27 يوليو 2022 في 4:55 م تمت كتابة ما يلي بواسطة ‪Freppel,
Wirich via TRNSYS-users‬‏ <‪trnsys-users at lists.onebuilding.org‬‏>:‬

> Hello,
>
>
>
> I want to assess the thermal comfort under solar radiation in a building.
> The ASHRAE-55 standards proposes a method to calculate the Mean Radiant
> Temperature including the solar radiation.
>
> I haven’t seen so far an add-on or a Type that performs this calculation.
> Given that all the information required (view factor, radiation heat flux,
> surface temperatures) are available in the building type, it should be
> easier to calculate it within the simulation instead of exporting all the
> data for a post-treatment.
>
>
>
> Is it in mind to develop such an add-on or if no, could it be if the need
> is growing ?
>
>
>
> Best regards
>
>
>
> *Wirich FREPPEL*
> Development engineer
>
> *COSMOS - *Buildings Energy Performance & Daylighting Group
>
> Cell: +33 637 053 174
>
> *Saint-Gobain Research Compiègne*
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220728/311a8b91/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 68377 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220728/311a8b91/attachment-0001.png>