[TRNSYS-users] output

[Huijie Pu]

Hello,
I built a room model with Cooling set to 26 degrees and gain set to ASHRAE_115W-Person_AIII_24癈, for a total of 60 people. But the output value QCOOL does not know why it is a sharp rise in one hour. In the following model construction, Cooling is turned off, and PID is used to adjust the temperature. The obtained temperature change is also a change in one hour as a stage, and the airflow output by PID is also like this.
kind regards,
Pu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220707/fa5be258/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 29806 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220707/fa5be258/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 29186 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220707/fa5be258/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 32274 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220707/fa5be258/attachment-0005.png>