[TRNSYS-users] Simulation stops

[David BRADLEY]

Gergely,

  I was able to confirm that your project does run in the most recent 
Trnsys18 release. I think Adrian is correct that we must have had a bug 
in an earlier release that got fixed. I would recommend getting in touch 
with your TRNSYS distributor for an update.

kind regards,

  David



On 01/17/2022 07:17, Gergely László Zsolt via TRNSYS-users wrote:
> Dear All,
>
> I am trying to simulate a floor heated/ slab cooled single family 
> house, directly connected to Type941 air-to-water heat pump. However, 
> the simulation stops running without any errors or warnings. Do you 
> have any ideas what could cause the problem?
> I'd be really grateful if you could have any suggestions!
>
> Thanks in advance,
> *László GERGELY*
> PhD student, Building Energy Engineering
> Budapest University of Technology and Economics
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220118/3f8bc2f4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Outlook-co3mk5b2.png
Type: image/png
Size: 7797 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220118/3f8bc2f4/attachment-0002.png>