[TRNSYS-users] trnsys 3D building

[David BRADLEY]

Pu,

   If the *.idf file has errors in it then TRNBuild won't be able to 
create the *.b18 file. Could you please send the *.idf file to your 
distributor so that they can have a look at the cause of the errors? If 
you aren't sure who to contact please email me directly and I will point 
you in the appropriate direction.

thank you in advance,

  David


On 02/14/2022 03:14, Huijie Pu via TRNSYS-users wrote:
> Hello，
>      I created a 3D building model in TRNSYS by following A4_ 
> 3DBuildingTutorial document and 05-multizonebuilding document, but 
> there are some errors when importing the IDF file generated by 
> trnsys3d in SketchUp in trnsys simulation Studio:
> Firstly, trnbuild has no input and output, no corresponding zone and 
> airnode; Secondly, the error displays cannot open bui file for 
> building description needed by this component (given in external files 
> tab). Please open a BUI file or cancel(to attach the file later).
>     How should these problems be solved? Thank you very much!
> kind regards,
> Pu
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220216/7f363314/attachment.htm>