[TRNSYS-users] Wall layer temperature

[hotline]

Hello Oselen,

yes, Type 399  can output temperatures with in the constructions at user-defined depths.
(further information https://www.trnsys.de/en/addons)

You may run Type 399 in parallel to your Tpe56 modelling. Thus, you don’t have to  adapt your TRNSYS model.
Maybe you need some more outputs for passing the boundary conditions to Type 399

This is a mission impossible for the standard wall model of TRNSYS.

Regards,

Marion

Transsolar Software Team
hotline at transsolar.com

Transsolar
Stuttgart | Munich | Paris | New York

Transsolar Energietechnik GmbH | Curiestrasse 2 | 70563 Stuttgart | Germany
CEO: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle
Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639


Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> Im Auftrag von Oselen Imafidon via TRNSYS-users
Gesendet: Mittwoch, 2. Februar 2022 22:13
An: trnsys-users at lists.onebuilding.org
Cc: Oselen Imafidon <josephoselen at yahoo.com>
Betreff: [TRNSYS-users] Wall layer temperature

Hello All,

Is it possible to calculate the inner wall temperature using Type 399 (PCM in passive and active wall construction), i.e can I get the temperature of any node in the wall construction.

I understand that for Type 56, I am only able to get just the surface temperatures because the response factor is developed for the whole wall construction. Is there any workaround I can use to be able to estimate the temperature of each layer?

Thank  you,
Oselen Imafidon

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220203/83d1d496/attachment.htm>