[TRNSYS-users] Trnsys3d plugin

[hotline]

Dear Aly,

If you have 3D geometry in your SketchUp-File (imported from dwg/ifc/..), that is suited for TRNSYS (closed room volumes, like with ifc spaces), you can also copy this geometry into a Trnsys3d zone. For this you should best open a new SketchUp instance, there add an empty Trnsys zone and then with the zone activated copy the geometry from the other file into the new one (file -> past in place). That way the geometry becomes associated with the zone like if you drew new geometry with the zone activated. We are currently working on updating the Trnsys3d Tutorial including a better explanation on how this works.

Best regards,
Christina

__________________________________________________________________________________________________


Transsolar KlimaEngineering

Stuttgart  | München | Paris | New York


https://www.trnsys.de<https://www.trnsys.de/>
https://transsolar.com/de

<https://www.trnsys.de>


Transsolar Energietechnik GmbH | Curiestraße 2 | 70563 Stuttgart

Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

The simulation project you have sent will be stored on the local servers of Transsolar Energietechnik GmbH for the duration of the project support. Our employees are obliged by us to confidentiality. After this period, all project-related data is deleted.

The storage of your personal e-mail and other contact information is based on the mutual interest in the execution of this traffic and on a mutual business contact. If you have any questions, please contact our data protection officer at privacy at transsolar.com<mailto:privacy at transsolar.com>. Our privacy policy can be found here<http://www.trnsys.de/docs/userservice/userservice_dataprivacy_en.htm>.
________________________________
Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> im Auftrag von David BRADLEY via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Gesendet: Montag, 28. November 2022 16:38
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: David BRADLEY <d.bradley at tess-inc.com>; Aly Osman <s132388 at student.squ.edu.om>
Betreff: Re: [TRNSYS-users] Trnsys3d plugin


Aly,

 I believe that you have to trace over the *.dwg file using the same tools that you used when creating the model from scratch.

kind regards,

 David


On 11/26/2022 00:17, Aly Osman via TRNSYS-users wrote:
Dear All,

I am trying to use the trnsys sketchup plug-in. I have imported my dwg files and I need to identify my zones, when I was learning about the plug-in I was drawing my buildings inside the zone created but now I have a building ready, how can I redraw them in the zone?

--
Kind regards,

Mr. Aly Osman
MSc. Mechanical Engineering



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org


--
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com<mailto:d.bradley at tess-inc.com>

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20221202/ee9e9f5a/attachment-0001.htm>