[TRNSYS-users] TRNSBuild active layer

[Mukhtar Abeid]

Hi guys

I found a problem in active layer modelling, where the results show no
heating response by airnode temperature even when the heating power is over
sized. The outlet temperature of the active layers doesn’t change!!.
Moreover, the ground temperature model is constant at zero Centigrade!

Thank you

Mukhtar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220831/4591b145/attachment.htm>