[TRNSYS-users] Building a greenhouse in TRNSYS

[Domenico Mazzeo]

Hello
Maybe this my recent paper can be useful to set your simulation

https://www.sciencedirect.com/science/article/pii/S135943112033180X?via%3Dihub

Regards

Il Gio 16 Set 2021, 21:18 Paris Pasqualin via TRNSYS-users <
trnsys-users at lists.onebuilding.org> ha scritto:

> Hello everyone,
>
>
>
> if I create a building in trnbuild and I don’t add a wall on certain
> direction, does trnbuild understand that there is no wall and will make the
> calculations based on that? The same goes for the flour. To be more
> specific, I have to build a greenhouse and on one side the greenhouse is
> open and covered with an insect proof net (which shouldn’t have any effect
> on the thermal calculations). The greenhouse also doesn’t have a floor. Can
> I create the greenhouse without adding the wall and the flour or I should
> adopt some “tricks”?
>
>
>
> Best regards,
>
> Paris
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>

-- 
------------------------------------------------------------------------------------------------------------------
Il banner è generato automaticamente dal servizio di posta elettronica 
dell'Università della Calabria
 <http://www.unical.it/5x1000>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210916/716e25f1/attachment.htm>