[TRNSYS-users] SketchUp in multi-zoning

[David BRADLEY]

Khalid,

  I would recommend starting with the Trnsys3d tutorial. If you are 
using v18, there is an extensive one in the 09-Tutorials.pdf 
documentation.  If you are using v17 then have a look at 
A4_3DBuildingTutorial.pdf

kind regards,

  David


On 10/25/2021 16:02, Khalid Ibaaz via TRNSYS-users wrote:
> Hello everyone,
> I have a small problem with the multi-zoning in SketchUp, assuming 
> that we have 3 zones (zone1, zone2 and zone3) and one of these zones 
> for example (zone1) is in contact with the other two zones (zone2 and 
> zone3) in one facade.
> I don't know how to define the adjacent wall zone1-zone2 and zone1-zone3 ?
> could you inform me on how to do it ?
> thank you in advance
> kind regards
>
> -- 
> Khalid IBAAZ
> *************
> PHD student
> Mohammadia School of Engineers- Morocco
> E3S Research Group
> *************************************
> ibaaz.khalid at gmail.com
> khalidibaaz at research.emi.ac.ma
> GSM : +212 677328948
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20211026/2f6e9f82/attachment.htm>