[TRNSYS-users] Fw: CoolProp_Fluids.f90 File Error

[David BRADLEY]

Andy,

   We'll take a look at the issue in the code. Do you have an example 
project that you could send? As a temporary workaround, are you able to 
convert your pressure in the input file so that the actual value that is 
being sent to CoolProp is correct in spite of what the unit codes say? I 
must admit to a complete lack of experience with CoolProp so my 
apologies if the suggestion is way off target.

kind regards,

  David


On 11/22/2021 04:22, ganzorig--- via TRNSYS-users wrote:
>
>     Dear Everyone,
>
>     I'm having a little bit of trouble with CoolProp_Fluids.f90 file.
>     In this file, the "2=Pressure" Unit is MPa，but in CoolProp Website
>     , the Pressure Unit is "Pa" . The website link is
>     http://www.coolprop.org/coolprop/HighLevelAPI.html#table-of-string-inputs-to-propssi-function.
>     This kind of problem can cause great annoyance.
>
>     Best Regards, Andy
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20211123/83be1f5b/attachment.htm>