[TRNSYS-users] Getting energy output (kWh) from PV panel (Type 103b)

[Jeff Thornton]

Amir,

Connect the power output from the PV panel to an integrator ; typically Type 24 or Type 46.

Jeff


> On May 12, 2021, at 8:43 AM, Amir Hossein Rahmanzadeh via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> 
> Hi everyone
> 
> 
> 
> I was wondering if it's possible to get the energy output of the PV panel over a period of time (such as an hour or a day) instead of power generated, multiplying the "Array power at the maximum power point" by time won't give the accurate answer since the rate is not constant. Is it possible to achieve Daily or Hourly energy output chart or table such as ones created by Pvsyst software?
> 
> 
> 
> Thank you all in advance 
> 
> 
> 
> Mechanical engineering at Iran university of science and technology
> Interested in fields of renewable energies, Data science & programming.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210512/08165c63/attachment.htm>