[TRNSYS-users] Change variable Min/Max limits

[David BRADLEY]

Once you have changed the proforma, you need to right click on the 
component in the Simulation Studio and select "replace," then browse to 
find the modified proforma. The change to the proforma is not 
automatically made in existing projects.

kind regards,

  David


On 05/03/2021 12:20, Thomas Eberle via TRNSYS-users wrote:
> Hi,
>
> I want to change the MIN/MAX limits of a variable of a type (in this 
> case 160c Electrolyzer). I already managed to change it in the .tmf 
> menu, but the changes are not applied to the sim studio. Does anyone 
> have an idea how to deal with this? I attached two photos. Thanks a 
> lot in advance. Greetings from Vienna.
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210503/e1dc79c7/attachment.htm>