[TRNSYS-users] Symmetry boundary condition

[Pouyan Talebizadehsardari (Staff)]

Dear All,

Hope all are well.

I draw a building in Sketchup. The house is a semi-detached building (called in the UK) which means that two similar houses are connected to each other. So, a symmetry boundary condition is used for the middle walls. Does anyone know which boundary condition I need to use in Sketchup? Please find the photo of the building attached.

Thanks in advance

Kind regards
Pouyan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210531/816d3e4f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2.JPG
Type: image/jpeg
Size: 32562 bytes
Desc: 2.JPG
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210531/816d3e4f/attachment-0002.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: rear.JPG
Type: image/jpeg
Size: 30089 bytes
Desc: rear.JPG
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210531/816d3e4f/attachment-0003.jpe>