[TRNSYS-users] Cooling demand in TRNSYS

RUBIO RUBIO, JOSÉ JAVIER josejavier.rubio at edu.upct.es
Fri May 7 05:52:08 PDT 2021


To whom it may concern,

I am developing a cooling system with TRNSYS18 and I have several problems when I try to connect as an input the heat transfer of the coils in the chambers by using the Cooling Type Manager. You have an example below:

[cid:image001.png at 01D74350.8D1C3640]

Where Q_evap4C, Q_evap8C, Q_carga4C and Q_descarga4C are the "Air Side Heat Transfer" output of the cooling coils.

[cid:image002.png at 01D74350.8D1C3640]

When I use it as an input for the power available in each cooling zone, the cooling demand of the zone is zero which is non-sense. Any way to figure it out?

Thanks in advance and sorry for the inconvenience,

Best regards.

Jose Javier.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210507/bcb913e2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 183954 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210507/bcb913e2/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 162649 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210507/bcb913e2/attachment-0003.png>


More information about the TRNSYS-users mailing list