[TRNSYS-users] Modelling losses to ground

David BRADLEY d.bradley at tess-inc.com
Fri Mar 26 14:25:11 PDT 2021


Leen,

   If it is a matter of a slab on grade (i.e. no basements) then you can 
probably use Type49 from the standard library, which is a simplified 
version of the TESS ground coupling model.

best,

  David


On 03/26/2021 15:58, leen peeters via TRNSYS-users wrote:
> Dear,
>
> I need to model the effect of a concrete floor with floor heating in 3 
> variations:
> * the 44000 m2 hall has no insulation in the floor
> * the 44000 m2 hall has 12 cm insulation in the floor
> * only the floor area between the outside till 10 meter inside the 
> building has insulation
>
> I do not have the ground model of the TESS library. Is there an other 
> way to model this? What happens if I made a new floor which is 
> composed of the current floor design and add "layers" of ground 
> underneath it?
>
> Thanks!
>
> Leen
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210326/a8a5d7af/attachment.htm>


More information about the TRNSYS-users mailing list