[TRNSYS-users] Problem adjacent window in Winter garden

[Toni Calabrese]

Ciao Miriam,
grazie mille per la tua risposta.

Non so per quale motivo, ma con il match automatico non mi riesce completamente. La cosa interessante è che ho provato a lavorare su un modello SketchUp piü semplificato con solo due zone ed in quel caso (facendo gli stessi identici steps) mi funziona perfettamente e mi riconosce "adjacent walls" e "adjacent windows". Non so per quale motivo con il match automatico non mi funziona.

Ho risolto adesso in altra maniera, ossia facendo il match manuale finestra per finestra perché non riesco a capire il percè non funziona. Qualche volta sto SketchUp ha tanti bugs all interno.

Ho comunque risolto in una maniera piu' spicciola, perche facendo quello che hai fatto tu (ossia quello che ho fatto io) non mi funziona completamente. Non so per quale motivo…

Grazie comunque e buona domenica.

Toni

From: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> On Behalf Of miriam di matteo via TRNSYS-users
Sent: Saturday, June 26, 2021 8:24 PM
To: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: miriam di matteo <dimatteo.1585179 at studenti.uniroma1.it>
Subject: Re: [TRNSYS-users] Problem adjacent window in Winter garden

Ciao Toni,
se ho capito bene quando importi il modello .ifd in TRNbuild con il giardino d'inverno ti da errore e non ti riconosce le condizioni di adiacenza, giusto?
ho scaricato il tuo modello .idf, l'ho importato in SketchUp; ho ridisegnato il giardino come nella figura che hai inviato; ho fatto il matching automatico e controllato che le nuove superfici adiacenti fossero state riconosciute, e sembra di si. Ho quindi importato nel Build, non mi da nessun errore.
Ti invio il files .idf e .b17, spero ti siano d'aiuto.

Fammi sapere se riesci a risolvere o meno

Il giorno sab 26 giu 2021 alle ore 10:12 Toni Calabrese via TRNSYS-users <trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>> ha scritto:
Hi everybody,
I am modelling in SketchUp a 4 storey building (see figure on the left). I imported it in Trnsys and it worked perfectly.

Now I would like to draw a winter garden for each floor on the south façade of this building (see figure on the right). If I try to import the model in Trnsys it does not work anymore because it does not recognize the windows between the winter garden and the flats (these windows were external windows and now should become adjacent windows).

I tried to draw the winter garden following the usual suggestions/recommendations, that means:

1)     I draw the winter garden;

2)     On the back wall of the winter garden (wall between the winter garden and flats) I draw the lines of the windows of the flats and the lines of the external walls of the five flats that are facing to this winter garden;

3)     I match the whole model.

Even if I follow this procedure it does not work. I attached here the model. Maybe someone of you could try to draw it and to check if it works?

Thanks in advance and have a nice day.



[cid:image001.png at 01D76B83.33EC2200]    [cid:image002.png at 01D76B83.33EC2200]


[cid:image004.png at 01D76B83.33EC2200]CAS Kursmodul Energiespeicher (4 Tage) an der OST – Rapperswil:
Alles was Sie zu thermischen, elektrischen, chemischen und mechanischen Energiespeichern wissen müssen:
Do. 02.09. / Fr. 03.09. / Do. 09.09. / Fr. 10.09.
Jetzt hier<https://www.ost.ch/de/event/article/energiespeicher-theorie-und-anwendungen-4-kurstage/> anmelden
________________________________
Toni Calabrese, MSc.
Wissenschaftlicher Projektleiter
toni.calabrese at spf.ch<mailto:toni.calabrese at spf.ch> | toni.calabrese at ost.ch<mailto:toni.calabrese at ost.ch>

T +41 58 257 4827

SPF Institut für Solartechnik
OST – Ostschweizer Fachhochschule
Oberseestr. 10 | CH-8640 Rapperswil | Switzerland | www.spf.ch<http://www.spf.ch/> | www.ost.ch<http://www.ost.ch/>

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210627/69680dac/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 159428 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210627/69680dac/attachment-0008.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 161936 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210627/69680dac/attachment-0009.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 11767 bytes
Desc: image003.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210627/69680dac/attachment-0010.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 13221 bytes
Desc: image004.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210627/69680dac/attachment-0011.png>