[TRNSYS-users] type 534

[Jeff Thornton]

Maryam,  

If you cannot see the volume of the tank as one of the parameters then you selected a version of that model where all of the detailed information is provided in an external data file.  I suggest, for now, that you use the version where all the parameters are listed.  As for putting in a temperature and not seeing any impact, did you also provide a flow rate?  I would also strongly suggest that you read the provided documentation for the model so you understand how it works.

Jeff 

Sent from my iPhone

> On Jun 25, 2021, at 9:15 AM, Maryam Khademi via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> 
> Hello,
> I have several problems with selecting a suitable tank storage. I selected type 534 but I cannot determine the volume for this component and I connected a data reader to one of the ports as its temperature, but I cannot observe this data when I got an output from temperature of this tank. I cannot understand what is the problem.     
>  
> Sent from Mail for Windows 10
>  
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210625/b86e6a7d/attachment.htm>