[TRNSYS-users] Drawing Attika in Trnsys3D SketchUp

[Juan Francisco Belmonte Toledo]

In my opinion, you have to split the floors of the attics to coincide exactly with the portions of the ceilings below (you mentioned you used the pencil to cut the roof, creating some roof and "ceilings", these ceilings have to coincide with the floors above). In such a way that the ceilings below and the floors above exactly match (areas, nodes, both coplanar, etc..). one same floor surface cannot be adjacent to two zones below, you should split the floor into pieces.

Hope it was the problem, not sure. Best.


De: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> En nombre de Toni Calabrese via TRNSYS-users
Enviado el: martes, junio 01, 2021 6:02 PM
Para: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
CC: Toni Calabrese <toni.calabrese at ost.ch>
Asunto: [TRNSYS-users] Drawing Attika in Trnsys3D SketchUp

Hi guys,
I am dealing with a problem since one day and I am not able to solve it (see below).
Basically I drawn a MFH (with a big cellar and four floors). As you can see, I drawn as well the two staircases. Now at the top of the building I would like to drawn the two attics (smaller compared to the others floors).
I know that in this special case, fistly we need to drawn the floor line on the ceiling of the four floor and this is what I did. But it does not work and, when I match the whole model, it does not recognize the adjacent ceiling between the attic and the last floor.

Someone has an idea how to approach on it? On the right side below you can see how the two attics should look like on the plant view.

[cid:image005.png at 01D75713.1F7893F0][cid:image006.png at 01D75713.1F7893F0]


________________________________
Toni Calabrese, MSc.
Wissenschaftlicher Projektleiter
toni.calabrese at spf.ch<mailto:toni.calabrese at spf.ch> | toni.calabrese at ost.ch<mailto:toni.calabrese at ost.ch>

T +41 58 257 4827

SPF Institut für Solartechnik
OST - Ostschweizer Fachhochschule
Oberseestr. 10 | CH-8640 Rapperswil | Switzerland | www.spf.ch<http://www.spf.ch/> | www.ost.ch<http://www.ost.ch/>
________________________________
[cid:image007.jpg at 01D75713.1F7893F0]SPF Industrietag 2021 - "40 Jahre SPF"
am Dienstag 22. Juni als Online-Veranstaltung, nähere Infos und Anmeldung unter
Anmeldung<https://spfindustrietag2021.questionpro.eu/> oder Programm<https://serv.spf.ch/fileadmin/docu/webforms/2021_Programm_SPF-Industrietag.pdf>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210601/966f5ecd/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 3674 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210601/966f5ecd/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 399163 bytes
Desc: image005.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210601/966f5ecd/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.png
Type: image/png
Size: 612557 bytes
Desc: image006.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210601/966f5ecd/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image007.jpg
Type: image/jpeg
Size: 5770 bytes
Desc: image007.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210601/966f5ecd/attachment-0005.jpg>