[TRNSYS-users] Type 508 (Cooling Coil): Outlet air temperature higher than setpoint

[RUBIO RUBIO, JOSÉ JAVIER]

Dear all,

I am using the Type 508 to model a cooling coil with the outlet air temperature set to a constant value. As far as I am concerned, there is enough air flowrate as well as fluid flowrate during the simulation but the outlet air temperature is much higher than the setpoint (for example, the setpoint is 2.8 ºC and the outlet air temperature is 12 ºC). Anyone can help me to understand why is that?

Thanks in advance,

Regards,

José Javier Rubio Rubio.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210615/dd0d0792/attachment.html>