[TRNSYS-users] Domestic Hot Water Demand

[Pouyan Talebizadehsardari (Staff)]

Dear All,

Does anyone know how to estimate hot water demand for a dwelling in Type 56?
For example, in Energyplus, the consumption rate for each area of the building is defined and then accordingly, by defining a schedule for the usage, the amount of hot water demand and also required heat load are estimated to provide the defined consumption rate. Is it possible to act similar in TRNSYS?

Kind regards
Pouyan

*******************************************************************************
Pouyan Talebizadeh Sardari, BSc MSc PhD AFHEA
Centre for Sustainable Energy Use in Food Chains,
Institute of Energy Futures,
Brunel University London,
Kingston Lane, Uxbridge, Middlesex, UB8 3PH, UK
Email: pouyan.talebizadehsardari at brunel.ac.uk<mailto:pouyan.talebizadehsardari at brunel.ac.uk>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210607/4b9e6564/attachment-0001.html>