[TRNSYS-users] Symmetry boundary condition

Tue Jun 1 02:37:12 PDT 2021

Dear Juan,

Many thanks for your reply.

So, is this correct now?

[cid:4aa7ee2c-e31f-4ad7-857f-8393fafac9cc]

Kind regards
Pouyan
________________________________
From: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> on behalf of Juan Francisco Belmonte Toledo via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Sent: 01 June 2021 06:39
To: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: Juan Francisco Belmonte Toledo <JuanF.Belmonte at uclm.es>
Subject: Re: [TRNSYS-users] Symmetry boundary condition

Hello.

It changes the name for each program I think, in trnsys is called “identical” or something like that. In EnergyPlus is “adiabatic” but the idea behind is the same.

Best.

De: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> En nombre de Pouyan Talebizadehsardari (Staff) via TRNSYS-users
Enviado el: lunes, mayo 31, 2021 8:38 PM
Para: trnsys-users at lists.onebuilding.org
CC: Pouyan Talebizadehsardari (Staff) <Pouyan.Talebizadehsardari at brunel.ac.uk>
Asunto: [TRNSYS-users] Symmetry boundary condition

Dear All,

Hope all are well.

I draw a building in Sketchup. The house is a semi-detached building (called in the UK) which means that two similar houses are connected to each other. So, a symmetry boundary condition is used for the middle walls. Does anyone know which boundary condition I need to use in Sketchup? Please find the photo of the building attached.

Thanks in advance

Kind regards

Pouyan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210601/5d92b00b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 14899 bytes
Desc: image.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210601/5d92b00b/attachment-0001.png>