[TRNSYS-users] WG: Problem with command "Show outliner window" in Trnsys3d

Tue Jul 27 04:19:19 PDT 2021

We found a solution that worked for Toni: Using Window -> Preferences -> Workspace -> Reset Workspace resets the position of popup windows so they are shown properly again

Christina
__________________________________________________________________________________________________

Transsolar KlimaEngineering

Stuttgart  | München | Paris | New York

https://www.trnsys.de<https://www.trnsys.de/>
https://transsolar.com/de

<https://www.trnsys.de>

Transsolar Energietechnik GmbH | Curiestraße 2 | 70563 Stuttgart

Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

The simulation project you have sent will be stored on the local servers of Transsolar Energietechnik GmbH for the duration of the project support. Our employees are obliged by us to confidentiality. After this period, all project-related data is deleted.

The storage of your personal e-mail and other contact information is based on the mutual interest in the execution of this traffic and on a mutual business contact. If you have any questions, please contact our data protection officer at privacy at transsolar.com<mailto:privacy at transsolar.com>. Our privacy policy can be found here<http://www.trnsys.de/docs/userservice/userservice_dataprivacy_en.htm>.

________________________________
Von: Toni Calabrese <toni.calabrese at ost.ch>
Gesendet: Dienstag, 27. Juli 2021 13:14
An: hotline <hotline at Transsolar.com>
Betreff: RE: Problem with command "Show outliner window" in Trnsys3d

Thanks a lot. I tried right now what you suggested me and it worked!!!

Thanks a lot and have a nice day.

Toni

From: hotline <hotline at Transsolar.com>
Sent: Tuesday, July 27, 2021 1:11 PM
To: Toni Calabrese <toni.calabrese at ost.ch>
Subject: AW: Problem with command "Show outliner window" in Trnsys3d

For me, connecting to the maximum number of screens I had used before did the job. If that does not work, have you tried using Window -> Preferences -> Workspace -> Reset Workspace ? Then try opening the window again

________________________________

Von: Toni Calabrese <toni.calabrese at ost.ch<mailto:toni.calabrese at ost.ch>>
Gesendet: Dienstag, 27. Juli 2021 12:21
An: hotline <hotline at Transsolar.com<mailto:hotline at Transsolar.com>>
Betreff: RE: Problem with command "Show outliner window" in Trnsys3d

Hi Christina and thanks for your answer.

I thought that this could be the problem. That’s why I tried to disconnect the second screen but does not work. I tried to pass from the extended view to the view only on my desktop but it does not work. I disconnect the HDMI cable and try it again but it does not work.

What can I do more?

From: hotline <hotline at Transsolar.com<mailto:hotline at Transsolar.com>>
Sent: Tuesday, July 27, 2021 12:06 PM
To: Toni Calabrese <toni.calabrese at ost.ch<mailto:toni.calabrese at ost.ch>>
Subject: AW: Problem with command "Show outliner window" in Trnsys3d

Hi Toni,

I have had this problem after changing from extending windows to further screens back to only my laptop screen. The window was somehow still shown in a non-existent second screen. Connecting to extended screens again I was able to find the outliner window and move it back to where it belongs. I don't know if this applies to you at all, but for me it seemed to be some sort of screen scaling issue.

Let me know if you figure it out.

Best,

Christina

__________________________________________________________________________________________________

Transsolar KlimaEngineering

Stuttgart  | München | Paris | New York

https://www.trnsys.de<https://www.trnsys.de/>
https://transsolar.com/de

Transsolar Energietechnik GmbH | Curiestraße 2 | 70563 Stuttgart

Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

The simulation project you have sent will be stored on the local servers of Transsolar Energietechnik GmbH for the duration of the project support. Our employees are obliged by us to confidentiality. After this period, all project-related data is deleted.

The storage of your personal e-mail and other contact information is based on the mutual interest in the execution of this traffic and on a mutual business contact. If you have any questions, please contact our data protection officer at privacy at transsolar.com<mailto:privacy at transsolar.com>. Our privacy policy can be found here<http://www.trnsys.de/docs/userservice/userservice_dataprivacy_en.htm>.

________________________________

Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org<mailto:trnsys-users-bounces at lists.onebuilding.org>> im Auftrag von Toni Calabrese via TRNSYS-users <trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>>
Gesendet: Dienstag, 27. Juli 2021 11:55
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>>; David BRADLEY <d.bradley at tess-inc.com<mailto:d.bradley at tess-inc.com>>
Cc: Toni Calabrese <toni.calabrese at ost.ch<mailto:toni.calabrese at ost.ch>>
Betreff: [TRNSYS-users] Problem with command "Show outliner window" in Trnsys3d

Hi everybody,

I have a strange problem in SketchUp/Trnsys3D. Everything is working properly, all the commands work but I am not able to open with the command "Show outliner window" the model with all the thermal zones. The command is present (see below) but when I try to push it, it does not appear anything. I tried to deinstall and install again SketchUp and plugin Trnsys3d but does not work.

Anyone had this problem before?

Thanks a lot for your help.

[cid:image003.png at 01D782E9.433226B0]  [cid:image005.png at 01D782E9.433226B0]

[cid:image007.png at 01D782E9.433226B0]CAS Kursmodul Energiespeicher (4 Tage) an der OST – Rapperswil:

Alles was Sie zu thermischen, elektrischen, chemischen und mechanischen Energiespeichern wissen müssen:

Do. 02.09. / Fr. 03.09. / Do. 09.09. / Fr. 10.09.

Jetzt hier<https://www.ost.ch/de/event/article/energiespeicher-theorie-und-anwendungen-4-kurstage/> anmelden

________________________________

Toni Calabrese, MSc.

Wissenschaftlicher Projektleiter

toni.calabrese at spf.ch<mailto:toni.calabrese at spf.ch> | toni.calabrese at ost.ch<mailto:toni.calabrese at ost.ch>

T +41 58 257 4827

SPF Institut für Solartechnik

OST – Ostschweizer Fachhochschule

Oberseestr. 10 | CH-8640 Rapperswil | Switzerland | www.spf.ch<http://www.spf.ch/> | www.ost.ch<http://www.ost.ch/>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210727/7830174e/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 125204 bytes
Desc: image003.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210727/7830174e/attachment-0006.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 159003 bytes
Desc: image005.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210727/7830174e/attachment-0007.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image007.png
Type: image/png
Size: 13197 bytes
Desc: image007.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210727/7830174e/attachment-0008.png>