[TRNSYS-users] Model only one wall

[hotline]

Hi Sam,

you could have a look at the independent wall types in TRNSYS, like type 36 thermal storage wall.
Depending on what exactly you want to model, you can also consider type 399, which we offer as an Add-On for PCM/ TAB constructions on our website https://www.trnsys.de/en/addons (in combination with a simple single-zone model though).

Best regards,
Christina

__________________________________________________________________________________________________


Transsolar KlimaEngineering

Stuttgart  | München | Paris | New York



Transsolar Energietechnik GmbH | Curiestraße 2 | 70563 Stuttgart

Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

The storage of your personal e-mail and other contact information is based on the mutual interest in the execution of this traffic and on a mutual business contact. If you have any questions, please contact our data protection officer at privacy at transsolar.com<mailto:privacy at transsolar.com>. Our privacy policy can be found here<http://www.trnsys.de/docs/userservice/userservice_dataprivacy_en.htm>.
________________________________
Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> im Auftrag von Sam Elyas via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Gesendet: Montag, 25. Januar 2021 21:58
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: Sam Elyas <karaktus at gmail.com>
Betreff: [TRNSYS-users] Model only one wall

Dear community,

Is it possible to model only one wall (not the entire building) in TRNSYS ?
I want to get the phase shift and the decrement factor of a newly developed material.

Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210126/ccdc6bd5/attachment.htm>