[TRNSYS-users] error type 647

David BRADLEY d.bradley at tess-inc.com
Thu Feb 25 06:19:34 PST 2021


This is nothing that you need to be concerned about. Some components are 
included in more than one library and so exist in more than one place 
when TRNSYS's kernel is looking to find the components that it needs for 
a simulation. This message is just alerting you that more than one copy 
was found and telling you which one of the two (or more) that it loaded.

kind regards,

  David


On 02/25/2021 08:10, gabriela vlad via TRNSYS-users wrote:
> Hello!
>
> I'm using type 647 (diverting valve) to provide the inlet liquid flow 
> for type 928 (fan coils used to heat  a building). I receive the 
> warning: "A duplicate of type 647 was found in 
> TESS_Hydronics_v.17.2.0164.dll".
> I receive a similar message for type 682 which is also included in my 
> project.  I get this warnings only when I apply a control signal for 
> the operation of the ventilation fan of type 928.
>
> Gabriela
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210225/c71ad7d4/attachment.htm>


More information about the TRNSYS-users mailing list