[TRNSYS-users] TRNSYS 3D building

[David BRADLEY]

If you want to make geometry changes to the building open it in TRNBuild 
and select "export Trnsys3d file" from the "File" menu. You'll be asked 
to specify a name for a new *.idf file. Once the file is created, open 
it in SketchUp, make your modifications and then go back through the 
Save...Import process that you did originally.

If you made any changes to the thermal capacitance of your airnodes you 
will need to remake those changes once you import the modified *.idf.

kind regards,

  David


On 02/04/2021 04:14, Imane Srhayri via TRNSYS-users wrote:
> Hello
>
> please i have a question concerning the 3D building ;
>
> if we finalise our simulation on trnsys studio , and then we modify 
> our building 3D on sketchup(by exemple adding a thermal zone or 
> changing the orientation of the whole building...) ;
>
>  these modifications will be taken in account in our model on 
> TRNBUILD? or the 3D building on sketchup should not be modified after 
> the simulation on trnstudio ?
>
> Thank you
> -- 
> /*SRHAYRI Imane**Ph.D Student */
> /*Research Team of Thermal, Energy and Environment*/
> /*ENSET, Mohammed V University of Rabat*/
> /**/
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210204/07f56c46/attachment.htm>