[TRNSYS-users] Simulation Studio crashes (it closes by itself while trying to connect components)

[David BRADLEY]

Unfortunately this is usually an indication that there is something 
corrupted about the Studio project file. I would recommend that you send 
the *.tpf to your distributor; they may be able to help recover the 
file. You can also try to write the input file (without running the 
simulation), then open a new Studio project and import the input file 
(*.dck).

kind regards,

  David


On 12/28/2021 22:10, asmin aryal wrote:
> Hello Everyone,
>
> I am trying to validate the TRNSYS simulation model with the 
> experiment I performed with radiant chilled ceiling and DOAS. During 
> this process I was trying to compare the state properties of air at 
> different points. But while trying to connect different components, 
> the simulation studio crashes (it closes without any warning). What 
> should I do to solve this?
> image.png
>
> Thanking you in anticipation.
>
> Best Regards,
> Ashmin Aryal
> PhD Student,
> The Joint graduate school of energy and environment (JGSEE)
> King Mongkutt's University of Science and Technology (KMUTT)

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20211229/3eeec1d8/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 136862 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20211229/3eeec1d8/attachment-0002.png>