[TRNSYS-users] Fan coil with heat pump

[saeid mohammadzadeh]

Dear users;
I have modeled a water-to-water heat pump which is connected to a fan coil
(type 600). The fan coil is connected to a building (Type 56).
for connection, I defined input as ventilation. When the system shifts to
cooling mode, the system gives an error and stops suddenly.
I have another question regarding the ventilation inputs for fan coil:
In "supply air conditioning" fan coil is an "external by other component"
or internal calculation?

*Best Regards*
*Saeid Mohammadzadeh Bina, Dr. (Eng.)*
*-------------------------------------------------*
*Akita University*
*Graduate school of International Resource Sciences*
*.1-1 Tegata gakuen-machi, Akita 010-8502, Japan*
*Tel: **+815068665026 (Japan)*
*       +989141011757 (Iran)*
*E-mail: **d9515254 at s.akita-u.ac.jp* <s.mohammadzadeh66 at gmail.com>
*           mohammadzadehsaeid at yahoo.com <mohammadzadehsaeid at yahoo.com>*


*-------------------------------------------------*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20201108/7cedadb1/attachment.html>