[TRNSYS-users] Ynt: trnsys adding component

[Duygu Kemeriz]

Hi Jeff;

Thank you for your reply but i do not understand exactly. I added just one value as an input calling electrolyzer current and while connecting other component,i connetted just once. Will i change it from the code i created?

Best Kindly

________________________________
Gönderen: Jeff Thornton via TRNSYS-users <trnsys-users at lists.onebuilding.org> adına TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org>
Gönderildi: 20 Mayıs 2020 Çarşamba 20:12
Kime: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Bilgi: Jeff Thornton <thornton at tess-inc.com>
Konu: Re: [TRNSYS-users] trnsys adding component


Duygu,

The message is telling you exactly what the problem is.  The proforma that is being used to provide the information to TRNSYS has only one input.  The source code for the component has told TRNSYS that it requires two inputs.  One of these is wrong and should be fixed.



Jeff



---
Jeff Thornton
President - TESS LLC
3 N. Pinckney Street, Suite 202, Madison WI USA 53703
Office: (608) 274-2577  Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com


On 05/20/2020 11:52 am, Duygu Kemeriz via TRNSYS-users wrote:

Hi;

I have added component and  i try to run it. But this gives an error. Do you think i made a mistake in adding the component or am i having a connection problem? Fortran code is not seem to error.  Could you help me,please? You can see an attachment the error.

Best Kindly

Duygu


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200520/6b9799d6/attachment.htm>