[TRNSYS-users] IDF import problem

[David BRADLEY]

Mohamed,

   If you have not already done so, could you open your *.idf in 
SketchUp and resave it, then try the import again into TRNBuild. If that 
does not work, you may be able to open the *.b17 that was created from 
the former *.idf using TRNBuild from v18 then export the *.idf from 
TRNBuild back to SketchUp, resave, then import once more into TRNBuild.

kind regards,

  David


On 03/25/2020 10:47, mohamed sarmouk via TRNSYS-users wrote:
> Hello,
> I recently updated Trnsys v18, and when i tried to import a idf file 
> that i made using trnsys3d, it doesn't import and a file (*.txt) is 
> created when i checked it in Calculation of geometry information start 
> it says :
> - Check base surface 6. Outside Boundary condition of base surface 
> must be ''External'' or ''Zone''!
>
> 1- How do i know which is surface 6 in trnsys 3d ?
> 2- I thought it's the base surface and i changed it to "outdoors" 
> still same problem
>
> Thank you.
> M.SARMOUK
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200326/ff2dff43/attachment.htm>