[TRNSYS-users] Generate radiance file from cmd

Thu Mar 26 01:39:57 PDT 2020

Dear Marion,

Indeed, it works fine :)
I could have found it before asking if I had searched a little bit more. All my apologies for your time spent of that question!
Thank you a lot anyway

Best regards

Wirich

De : TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> De la part de Marion Hiller via TRNSYS-users
Envoyé : jeudi 26 mars 2020 08:51
À : TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc : Marion Hiller <Hiller at Transsolar.com>
Objet : Re: [TRNSYS-users] Generate radiance file from cmd

Dear Wirich Freppel,

the call is pretty simple, since the b18 file is the only argument needed:

c:\TRNSYS18\Building\trnRAD\trnRAD.exe  c:\TRNSYS18\Examples\3D_Building\6_Step_Add_Daylight\Building_step6.b18

All parameters for the file generation are included in the "PROPERTIES" section of the b18 file :

*--------------------------------------------------------------------------------
*  P r o p e r t i e s
*--------------------------------------------------------------------------------
PROPERTIES
DENSITY=1.204 : CAPACITY=1.012 : PRESSURE=101325.000 : HVAPOR=2454.0 : SIGMA=2.041e-007 : RTEMP=293.15
*--- convective heat transfer coefficient calculation ---------------------
KFLOORUP=7.2 : EFLOORUP=0.31 : KFLOORDOWN=3.888 : EFLOORDOWN=0.31
KCEILUP=7.2 : ECEILUP=0.31 : KCEILDOWN=3.888 : ECEILDOWN=0.31
KVERTICAL=5.76 : EVERTICAL=0.3
*--- radiance parameters -------------------
SCENE_ROTATION_ANGLE=0 : GROUND_IDS=10004 : GROUND_REFLECTANCE=0.2 : SHADER_REFLECTANCE=0
CALC_MODE=CLASSIC : LATITUDE=48 : LONGITUDE=-9.2 : TIME_ZONE=-15 : SITE_ELEVATION=200
AB=5 : AD=1000 : AS=20 : AR=254 : AA=0.1
LR=6 : ST=0.15 : SJ=1 : LW=0.004 : DJ=0 : DS=0.2 : DR=2 : DP=512

Note: these Parameters aren't included in the TRNBuild dialog window of "PROPERTIES", they are defined in the TRNbuild dialog window "generate radiance files".

Kind regards,

Marion

Marion Hiller
+49 711 679 76 32 | hiller at transsolar.com<mailto:hiller at transsolar.com>

Transsolar SoftwareEngineering
Stuttgart | Munich | Paris | New York

Transsolar Energietechnik GmbH | Curiestrasse 2 | 70563 Stuttgart | Germany
CEO: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle
Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org<mailto:trnsys-users-bounces at lists.onebuilding.org>> Im Auftrag von Freppel, Wirich via TRNSYS-users
Gesendet: Mittwoch, 25. März 2020 22:06
An: TRNSYS USERS (trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>) <trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>>
Cc: Freppel, Wirich <Wirich.Freppel at saint-gobain.com<mailto:Wirich.Freppel at saint-gobain.com>>
Betreff: [TRNSYS-users] Generate radiance file from cmd

Dear TRNsys users,

I would like to generate the radiance file from the Windows command window. I know how to do that for the calculation of VFM, by using trnvfm.exe, so I guess the same thing is possible for radiance file generation.
But with trnRAD.exe, it seems to be a little bit more complicated since there are options to set before generating the file, for example, selecting the pre-processing for daylight simulation.

As I would like to generate a "classic" radiance file, could you please give me a hint on the code line to write in order to properly generate the radiance file ?

Thank you in advance

[02. Logo_Corporate_RVB_2]
Wirich FREPPEL Ph.D
Development engineer
COSMOS - Buildings Energy Performance & Daylighting Group
[cid:image002.jpg at 01D60352.820AB630]
[TIRET.jpg]

SAINT-GOBAIN RESEARCH COMPIEGNE
1 rue de Montluçon * BP 40103 * 60777 Thourotte * France
Tel: +33 637 053 174
E-mail: wirich.freppel at saint-gobain.com<mailto:wirich.freppel at saint-gobain.com>
www.saint-gobain.com

[cid:image002.jpg at 01D60352.820AB630]

Confidential - Property of Saint-Gobain, the information contained herein are considered confidential.
Their presentation or reproduction is prohibited without the prior written consent of the sender or author.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200326/0f2aaa07/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1703 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200326/0f2aaa07/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 983 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200326/0f2aaa07/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 174 bytes
Desc: image003.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200326/0f2aaa07/attachment.png>