[TRNSYS-users] Why type11d changes the outlet temperature?

[Hooman Azad]

Tim

I already tried 11h, still, the outlet temperatures of the mixtures of two identical flows are not the same. I tried to use an equation component instead, to make TRNSYS understand I simply want to mix and divide some flows, with no temperature change, and it worked!

Thanks anyway

Hooman 

 

 

From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of Tim McDowell via TRNSYS-users
Sent: Monday, June 8, 2020 5:04 PM
To: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: Tim McDowell <mcdowell at tess-inc.com>
Subject: Re: [TRNSYS-users] Why type11d changes the outlet temperature?

 

Hooman Azad -

If you are wanting to simply mix two fluid streams together use the "Tee Piece" component (11h) rather than the "Controlled Flow Mixer" component (11d).

Regards,

Tim

 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
3 N Pinckney St, Suite 202
Madison, WI 53703
office: 608-274-2577
cell: 608-225-5250

On 2020-06-05 05:10, Hooman Azad via TRNSYS-users wrote:

Dear friends

In Figure 1 the outlets of two collectors (CPC 1 and CPC 2) with the same temperatures are connected to a type11d (Mixer). Although type11d is not supposed to change the temperatures, the mixer’s outlet temperature in Figure 2 is something fixed, not equal to inlet temperatures…. I wonder why.

Thanks for your help

Hooman

 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org <mailto:TRNSYS-users at lists.onebuilding.org> 
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200609/1d496251/attachment.htm>