[TRNSYS-users] Impose radiation and temperature

[mohamed sarmouk]

Got it thank you Jeff

Le dim. 19 janv. 2020 à 9:09 PM, Jeff Thornton via TRNSYS-users <
trnsys-users at lists.onebuilding.org> a écrit :

> If you don't connect the inputs to the model, the component will take the
> initial values of the inputs as constants.  So if you don't hook up the
> radiation and temperature you can set the values to 1000 W/m2 and 25 C.
> But be careful that you also set the incidence angles, and other inputs
> correctly.
>
>
>
> Jeff
>
>
>
> ---
> Jeff Thornton
> President - TESS LLC
> 3 N. Pinckney Street, Suite 202, Madison WI USA 53703
> Office: (608) 274-2577  Fax: (608) 278-1475www.tess-inc.com
> E-Mail: thornton at tess-inc.com
>
> On 01/19/2020 1:35 pm, mohamed sarmouk via TRNSYS-users wrote:
>
> Hello,
> Supposing that i want to impose a specific meteorological conditions on a
> solar collector for example (1000 W/m² and ambiant temperature 25 °C) for a
> 5 hour period. How do i do that ?
> Trnsys 17
> Thank you
> M.SARMOUK
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200119/16362695/attachment.html>