[TRNSYS-users] Exit the TRNEXE without the promt tab

[Muthalagappan Narayanan]

Dear TRNSYS Users,

I am trying to optimise variables in TRNSYS using Matlab by calling trnexe
using MSDOS command. It is kind of similar to the Genopt but one problem I
have is the pop up tab which appears after the simulation is complete. It
requires either to click a *'Yes'* to exit when plotter are on otherwise to
click *'continue'* when plotters are switched off. And only after exiting,
the values are written in the output files.

*Is there a way to automatically exit TRNEXE when the simulation is
completed without having to click on 'Yes' or 'Continue' ?*

With Regards,

Muthalagappan Narayanan

Research Engineer and PhD Student



[image: 2019-02_THU_Signatur_60]

-- 

Ulm University of Applied Sciences

Muthalagappan Narayanan

Research Engineer and PhD Student

Institute for Energy- and Drive Technology

P-207, Eberhard-Finckh Straße 11,

89075 Ulm, Germany

Tel.: +49 (0)731/50-16 939

Fax: +49 (0)731/50-28 363

E-Mail: Muthalagappan.Narayanan at thu.de

www.hs-ulm.de

Working hours: Th. - Fr., 09:30 - 18:00



[image: cid:image001.png at 01D320B4.E96A8270]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200113/a5a2b015/attachment.html>