[TRNSYS-users] Type 94a- Module Area

[Domenico Mazzeo]

Dear Amir,
actually Trnsys does not use the module area to evaluate the electrical and
thermal performance of a PV module.
It solves the electrical I-V characteristic cueve step by step for a module
consisting of n cells known the electrical data of a PV cell (short
circuit, open circuit and so on).
This because if it knows the electrical performance of a cell (Vmp and Imp)
in reference conditions, the number of cells define the performance of the
entire module.
Regards

Il Ven 14 Feb 2020, 19:48 Amir Hossein Rahmanzadeh via TRNSYS-users <
trnsys-users at lists.onebuilding.org> ha scritto:

> Hi
>
> I'm relatively new to trnsys and I'm trying to run a simulation with Type
> 94a but while doing that i faced something strange.
>
> Its odd that if I change the "Module Area" nothing changes in final graph!
> even if I set it to zero.
>
> Why is so? Whats the role and meaning of Module Area then?
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200214/06277251/attachment.htm>